Charging cycle is probably a common problem for most iPhone users. The iPhone, like any other smartphone, needs to be updated to keep it running smoothly. After updating to a new version of iOS, it’s quite common for an iPhone to get stuck in a boot loop. In simple terms, a boot loop describes when an iPhone is stuck during boot that keeps restarting. When this happens, often times the Apple logo will appear and then disappear.
Below we get into the solution to iPhone boot loop problem, let’s briefly discuss why it happens in the first place.
- Considering that iPhone is a closed ecosystem, several iPhone users try to jailbreak their phones. If this is not done correctly, it can cause serious problems to the device. This can turn it into a “boot loop iPhone”, ie. An iPhone that easily gets stuck in a charging loop.
- Also, if a user doesn’t update their device properly from official sources, it can cause boot loop issue. Also, if the update stops in the middle, it may be due to insufficient data, memory or battery, the iPhone may freeze.
- Also, if you update your iPhone using iTunes and the network becomes bad or interrupted, it can cause a boot loop problem.
Methods to Fix iPhone Stuck in Boot Loop
Now that we know what a boot loop is and what causes it, let’s discuss some common ways this problem can be resolved. In this article, we’ll look at four methods for fixing a boot loop problem with the highest success rates
1. Fix iPhone Stuck in Boot Loop with iOS Repair Tool [No Data Loss]
Step 1: Connect iPhone to PC/Mac
- Download iMyFone Fixppo on your Windows/Mac PC. Press here download for windows and Press here download for mac. The download takes only a few minutes. Less than two minutes on my network
- Run iMyFone Fixppo on your Windows PC/Mac
- Using a USB cable, connect iPhone to your computer
- Click on Apple System Repair
Step 2: Standard mode to fix iPhone boot loop without data loss
After clicking on Apple System Repair, select “Standard Mode”. This mode will help you repair your device without losing your data. However, it may require you to put your device into recovery mode first.
Please note that the program will not work properly if your iTunes is damaged. You will need to fix this first before trying again. Fortunately, if your iTunes is damaged, you only need to click “Repair” to download and fix it.
Step 3: Download the patch firmware
The program will detect the firmware and you can download the one that pops up. I prefer to download the one that pops up, but it’s important to note that you can download whatever suits you
Step 4: Run Standard Repair iPhone in Reboot Loop
After downloading the firmware, click “Start Standard Repair”. This will allow the program to prevent your iPhone from charging in a loop
Once it succeeds, you will get an on-screen message that says “The program has successfully repaired your device. Wait a moment. Your device will start soon”
Gizchina News of the week
2. Force restart iPhone to fix iPhone restart cycle
Another option to solve the boot loop problem is yes forced restart iPhone. There is no data loss with this method, but the success rate is only 40%. This means that there is no guarantee that it will fix the problem. Force restarting iPhone differs slightly for different models
- For iPhone 15/14/13/12/11/X/8:
1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button.
4. Release the side button when you see the Apple logo appear
Press and hold the Sleep/Wake button and the Volume Down button at the same time for at least ten seconds until the Apple logo appears on the screen
- For iPhone 6/6s and older models:
1. Press and hold the Power/Sleep button and the Home button at the same time.
2. Continue to hold both buttons until the Apple logo appears on the screen, then release the buttons.
3. Use iTunes/Finder to restore iPhone stuck on boot [Lose Data]
Although the success rate of this method is 60%. It has a higher success rate than the force restart method. However, you are guaranteed to lose your data. So it’s important to back up your data before trying.
- Connect your iPhone to your computer and open iTunes or Finder (make sure it’s the latest version).
- If your iPhone is recognized, click the device icon.
- Select “Restore Backup” and select your preferred backup from the pop-up window.
- Click “Recover” to start the process.
- Wait for iTunes/Finder to restore your device, resolving the boot loop issue.
4. Put the iPhone into recovery mode to fix the iPhone charging cycle [Loss Data]
This method has a 60% success rate, but it will erase all information on your device. Follow the steps below to try this method
Step 1. Connect your iPhone to computer and open iTunes/Finder.
Step 2
For iPhone 8 or later:
- Press and quickly release the volume up button.
- Press and quickly release the volume down button.
- Then press and hold the side button until you see the recovery mode screen.
iPhone 7/7 Plus:
- Press and hold the volume down and sleep/wake buttons at the same time.
- Keep holding them until you see the recovery mode screen.
iPhone 6s and older:
- Press and hold the Home and Sleep/Wake buttons at the same time.
- Keep holding them until you see the recovery mode screen.
Step 3. After logging in recovery mode, iTunes/Finder will detect the problem and prompt you to update or restore your iPhone. Select Recovery to fix the boot loop issue.
This process will reinstall iOS on your iPhone and potentially fix any software issues causing the boot loop. But it will also erase all the data on your device, so be sure to backup your iPhone before you try this. If the boot cycle continues after a restore, there may be a deeper hardware issue that requires further troubleshooting or repair.
How to avoid your iPhone getting stuck in the charging loop again
To avoid your iPhone getting stuck in a boot loop again, you can follow these preventative measures based on the information from the sources provided:
1. Update iOS version: Make sure your iPhone is running the latest iOS version by going to Settings > General > Software Update > Download and Install.
2. App Cleanup: Remove unprotected apps from unknown sources and clear app caches by going to Settings > Privacy > Analytics > Analytics Data.
3. Reinsert the SIM card: Insert the SIM card correctly in your iPhone to prevent any problems that could lead to charging loop.
4. Avoid Malware and Bad Updates: Be careful with app downloads and software updates to prevent malware or bad updates that can cause a boot loop.
5. Save some power: Don’t run your device down to 0% all the time. This will force shutdown your iPhone and may eventually cause the device to boot.
6. Don’t Jailbreak: Jailbreaking is an unofficial and dangerous practice that should only be done by experts. Avoid it.
7. Get official apps: Don’t install apps from untrusted sources. You can get apps from third-party sources, but make sure they are trustworthy.
By following these steps, you can reduce the chances of your iPhone getting stuck in a charging loop again and ensure a smoother user experience with your device.
Conclusion
iPhone boot loop problem is a common problem that can be caused by various factors including incorrect software updates, jailbreak and hardware malfunctions. Although there are several methods to fix a boot loop, such as using a repair tool, force restarting or restoring the device, the most effective solution is to use a specialized tool such as iMyFone Fixppo, which has a 99% success rate and can resolve the issue without data loss. To prevent the boot loop from happening again, it’s extremely important to keep your iPhone software up-to-date, avoid jailbreaking, and be careful with app downloads and software updates.
